Techno Toy Tuning has a nifty setup for the rear of the 240Z, 260Z, and 280Z!
Our shop 240Z had a high HP Ford 302 in it and we've always wanted a "BETTER" solution for the CV joints and stub axles in the rear. In the past, no matter how you upgraded the U-joints and axles, you still had the weak stubshafts going through the outer hubs. If you break a stubshaft, the wheel leaves the car and heads down the road. On the later model Nissan cars, the hub bolts to a backing plate, so no matter what, the wheel still stays attatched to the car if you break a stubshaft.
With the HP and torque that many of our cars are producing, the factory Z stubshafts just don't hold up to the task.
We sat down and said to ourselves... "If I could have the dream setup, that would combine ALL the features we wish we could have, what would it be?" After about 9 months of design time, this is what we've com up with! We now have at least 100 of these kits in use worldwide on cars running from 250HP to 1100HP.
This setup will allow you to source and direct bolt in the following donor parts from these chassis cars: S13, S14, S15, R32, R34, Z32, Z32TT and Q45. In order to maintain proper pinion angle and clearance, R230 differentials will require notching the beam that runs above the diff.
3. CV Shafts
4. Hubs (both 4 lug and 5 lug)
Our full rear end conversion includes:
Full rear coilovers with fabricated strut tubes, incorporating camber adjustment
Koni short stroke adjustable rear shocks
Your choice of Eibach ERS springs
Rear weld in camber plates or bolt in camber plates, your choice.
Backing Plates to mount the late model hubs on
New axle shafts (you send us your CV's and we convert them over and rebuild them completely for you)
New drop mounts for the rear lower control arms
New Dogbone tying it all together
New Mustache bar tailored to the exact diff you will be using
New front diff mount for the exact diff you will be using
This kit combines all the features of a rear disc brake conversion, diff conversion, CV Mount, axle, stub axle and hub conversion all in one!
It will not affect offset of the rear wheels or affect rear suspension geometry. Your car will still have perfect Z car handling after the conversion.
You can purchase the Complete Kit or individual parts as needed. Buy directly from our website if you want everything below, or e-mail us direclty if you want individual components. Either way, we'll need to talk to you to tailor the kit to fit your specific needs.
Depending on current demand, fabrication time may be 4-6 weeks.