Suspension

We have always offered custom billet wheel adapters for various cars. We can provide these in the following specs: 4x114.3-->4x114.3 in 1 inch, 1.25 inch or 1.5 inch thick 4x114.3-->4x100 in 1 inch thick 4x100-->4x100 in 1 inch, 1.25 inch or 1.5...

We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...

We now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...

This Lateral bar is specifically designed to help swap the 79-83 Celca Supra Rear end into the AE86 Corolla.  This has the longer length and proper bushings sizes required for the swap. Please be sure to check out our Celica Supra Conversion 4 Links as...

We designed these specifically to hold up to the use and abuse of our Rally customers in the Bahamas, Australia, Eastern Africa and Northern Europe. These are the strongest traction brackets in production for the AE86, guaranteed. These will eliminate...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this lateral rod is SUPER tight! The original bolt for the...

These are our upgraded OE style outer tie rods for the AE86 Corolla. We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long lasting (just like all our other rod...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

Factory rubber bushings were never meant to take much abuse and the sloppiness in your suspension can be considered a direct result. Prothane's urethane suspension bushings were developed to control torque and deflection, giving you a noticeable...

AE86 Lateral Rod Drop Mount On lowered AE86's this allows you to correct the roll center on the rear end of the car, and restore panhard geometry back to what Toyota intended. This also helps to brace the lateral rod pin by tying it together with the...