heading-img

WHAT ARE YOU SHOPPING FOR TODAY ?

KE10

Show Filter Side Bar

  • TRD Short Stroke Adjustable Shocks

    TRD Short Stroke Adjustable Shocks

    TRD Short Stroke Race Dampers (adjustable). These are the  blue model's which are for race handling use. Best for cars sitting 2" or more below factory height. For use with much  firmer than factory spring rates. Best for use with lowering...

    0 Reviews

    $330.00 - $490.00
  • T3 CP92 Camber Plates

    T3 CP92 Camber Plates

      Black T3 Camber Plates. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...

    0 Reviews

    $325.00 - $410.00
  • 45MM Weld-on Front Coilover Kit

    45MM Weld-on Front Coilover Kit

    Our 45MM Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes the longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that has...

    0 Reviews

    $325.00 - $385.00
  • Rear Short Stroke Shocks

    Rear Short Stroke Shocks

    We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...

    0 Reviews

    $230.00 - $335.00
  • ITG Filter System for 40mm Carbs

    ITG Filter System for 40mm Carbs

      We designed a backing plate that perfectly mounts up to the 40mm Mikuni, Webber and Solex carbs and allows the usage of the ITG Filtration system. Our velocity stacks fit perfectly inside as well! Quick Release system to easily remove the filters...

    0 Reviews

    $95.00 - $255.00
  • Velocity Stacks For Carburetors

    Velocity Stacks For Carburetors

      Techno Toy Tuning Velocitiy Stacks for the Weber, Mikuni, and Solex carburetors. Solid billet construction, these are machined from one piece of aluminum from beginning to end. Fully radiused mouth for maximum airflow potential. Availabe in 40mm,...

    0 Reviews

    $245.00 - $365.00
  • T3 x Swift Japan Springs Pair

    T3 x Swift Japan Springs Pair

      Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...

    0 Reviews

    $180.00
  • HyperCo Helper Spring Kit

    HyperCo Helper Spring Kit

    Do you like to run your car low and deal with an excessive amount of droop that unseats the springs? Or maybe you're just tired of hearing a clunk when 3 wheeling out of driveways. Our new HyperCo Helper Spring Kit is the perfect solution for these...

    0 Reviews

    $150.00
    Add To Cart The item has been added
Showing 1 to 8 of 23