TE27

This Front Big Brake Kit is a direct bolt on for the TE27 and TA22 strut casings. Features 300MM x 20mm  2 piece rotor and massive Wilwood Forged Dynalilte 4 piston calipers. Choose drilled, slotted, or blank rotors. Comes with stainless lines, pads...

  The AE86 big daddy front Brake Kit is here! This kit is the largest AE86 Kit we've ever made. This kit is an evolution of the kit that has been on my car for 14 years, and was on the car when driven by Keiichi Tsuchiya in the Hot Version video...

Building and Tuning Coilover's for Classic Japanese Cars is something that we have offered for the past 20 years! Over that time, we've tested lots of Shock and Spring options to find what works best for each specific chassis! Our Street Spec builds will...

  Something a little special for the TE27 Mango guys! Our new GTX2 Lower Control Arms are now available. These units replace the factory front lower control arms AND caster (TC) rods. Specs: Fully adjustable on car Up to +30MM extra track Full...

We are proud to release our new SUPER Evolved Knuckles(steering arms) and outer tie rods for Toyota's. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The...

Koyo 71-74 Toyota Corolla 1.6L TE27/TE28/TS21 Manual Transmission RadiatorThis Part Fits:   Year Make Model Submodel 1971-1974 Toyota Corolla Base

Our SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...

  Our Front Bolt-On Coilover Kit was designed as a "slip on" option for those using full length shocks and looking for the ability to adjust their ride height. It includes short sleeves, spring perches, upper hats, and your choice of spring rate!...

  Black T3 Camber Plates. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...

 All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4"...