-
SUPER Evolved Knuckles with Outer Tie Rods for 85/90mm Toyota StrutsWe are proud to release our new SUPER Evolved Knuckles(steering arms) and outer tie rods for Toyota's. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The...$535.00
-
85mm/90mm SUPER Evolved Knuckles for Just About Every Old School ToyotaOur SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...$355.00
-
TRD Short Stroke Adjustable ShocksTRD Short Stroke Race Dampers (adjustable). These are the blue model's which are for race handling use. Best for cars sitting 2" or more below factory height. For use with much firmer than factory spring rates. Best for use with lowering...$330.00
-
Weld On Coilover KitOur Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate! The kit was designed for the "do it yourselfer" that...$325.00
-
T3 CP107 Camber PlatesT3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...$325.00
-
Rear Short Stroke ShocksWe now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...$230.00
-
ITG Filter System for 40mm CarbsWe designed a backing plate that perfectly mounts up to the 40mm Mikuni, Webber and Solex carbs and allows the usage of the ITG Filtration system. Our velocity stacks fit perfectly inside as well! Quick Release system to easily remove the filters...$95.00
-
Velocity Stacks For CarburetorsTechno Toy Tuning Velocitiy Stacks for the Weber, Mikuni, and Solex carburetors. Solid billet construction, these are machined from one piece of aluminum from beginning to end. Fully radiused mouth for maximum airflow potential. Availabe in 40mm,...$245.00
-
T3 x Swift Japan Springs PairSwift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...$180.00
-
Front Strut Tower Brace for TT141 CoronaLight weight aluminum construction, powder coated laser cut steel brackets, and spherical rod end construction with right/left hand threading for an exact adjustable fit. We chose to powder coat the brackets because it is far more durable than paint...$175.00
-
HyperCo Helper Spring KitDo you like to run your car low and deal with an excessive amount of droop that unseats the springs? Or maybe you're just tired of hearing a clunk when 3 wheeling out of driveways. Our new HyperCo Helper Spring Kit is the perfect solution for these...$150.00
-
HyperCo Coilover SpringsHyperCo Coilover Springs are the top choice of winning race car drivers and drifters worldwide! Proven in Indy, IMSA, and F1 to perform consistently, season after season. Advanced metallurgy, spring winding, and heat treating techniques...$145.00