TA22

This Front Big Brake Kit is a direct bolt on for the TE27 and TA22 strut casings. Features 300MM x 20mm  2 piece rotor and massive Wilwood Forged Dynalilte 4 piston calipers. Includes Slotted Rotors Comes with stainless lines, pads and all mounting...

  The AE86 big daddy front Brake Kit is here! This kit is the largest AE86 Kit we've ever made. This kit is an evolution of the kit that has been on my car for 14 years, and was on the car when driven by Keiichi Tsuchiya in the Hot Version video...

Building and Tuning Coilover's for Classic Japanese Cars is something that we have offered for the past 20 years! Over that time, we've tested lots of Shock and Spring options to find what works best for each specific chassis! Our Street Spec builds will...

Something a little special for the Celica guys! Our new GTX2 Lower Control Arms are now available. These units replace the factory front lower control arms AND caster (TC) rods. Our TA22 GTX2's use the larger RA28 Ball Joint and require the appropriate...

Rod ends are massive 3-piece teflon-lined, making them self lubricating and eliminating the need for a zirc fitting.   All spacing hardware is CNC'd Stainless Steel. Also known as rear trailing arms, our Rear Four Links feature Heim joints (Spherical...

We are proud to release our new SUPER Evolved Knuckles(steering arms) and outer tie rods for Toyota's. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The...

  Fully Fabricated steel lower control arms (No used OEM parts)! Double adjustable hardware (extend or shorten on car, no unbolting) OEM-style ball joints, strongest option, easy replacement. Length adjustable from .25" below factory to 1.5" over...

Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...

For those swapping to a different rear end, often times welding on new 4 link and panhard mounts is required. This full set of four 4-link mounts and panhard mount comes pre-asssembled and ready to weld on. Available for both normal OD AE86/Celica...

Our SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...

  Black T3 Camber Plates. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...

 All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4"...