BMW

Ohlins 07-14 MINI Cooper/Cooper S (R56) Road & Track Coilover System

Ohlins 02-06 MINI Cooper/Cooper S (R50/R53) Road & Track Coilover SystemInstallation Instructions

Radial mounting provides secure and accurate installation of the forged billet DynaPro four piston caliper with large diameter rotors for this group of front and all wheel drive sport compacts. These kits are the perfect compliment to wheel, tire, and...

Full set of four rear control arms for the R53 Mini Cooper S.  Allows camber, toe and minor track adjustments. Solid aluminum rods paired with our massively oversized 3 piece teflon lined rod ends ensures that these control arms are super strong...

The R50/R53 Mini's Front Lower Control Arm Bushings are made of soft rubber that allows for a comfortable ride when new but they are prone to wearing out every 60k miles. The soft rubber also causes misalignment in the front suspension that can make...

Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...

The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them. What we do is freeze the...

Our 45MM Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes the longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that has...

  Techno Toy Tuning Velocitiy Stacks for the Weber, Mikuni, and Solex carburetors. Solid billet construction, these are machined from one piece of aluminum from beginning to end. Fully radiused mouth for maximum airflow potential. Availabe in 40mm,...

  Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...

Do you like to run your car low and deal with an excessive amount of droop that unseats the springs? Or maybe you're just tired of hearing a clunk when 3 wheeling out of driveways. Our new HyperCo Helper Spring Kit is the perfect solution for these...