KE70

  The AE86 big daddy front Brake Kit is here! This kit is the largest AE86 Kit we've ever made. This kit is an evolution of the kit that has been on my car for 14 years, and was on the car when driven by Keiichi Tsuchiya in the Hot Version video...

We now offer 3 different levels of damping choices for our Rear Coilovers to fit your budget and specific driving needs! All of our rear coilovers are built around high-quality Japanese short stroke dampers and come standard with HyperCo Springs in the...

  Something a little special for the AE86, TE72, and KE70 guys! Our new GTX2 Lower Control Arms are now available. These units replace the factory front lower control arms AND caster (TC) rods. Specs: Fully adjustable on car Up to +30MM extra...

This is a custom 4 link set specifically designed to allow the direct bolt in of the Celica/Supra 7.5" rear end into the AE86 Corolla. On high horsepower AE86's, the Celica Supra diff from the 1979-->1982 Celica Supra with disc brakes is the preferred...

  Rod ends are massive 3-piece teflon-lined, making them self lubricating and eliminating the need for a zirc fitting.   All spacing hardware is CNC'd Stainless Steel. Also known as rear trailing arms, our Rear Four Links feature Heim joints...

Our SUPER Evolved Knuckles (steering arms) and outer tie rods for Toyotas with 87mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The...

Our SUPER Evolved Knuckles(steering arms) for Toyotas with 87mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...

Our SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...

TRD Short Stroke Race Dampers (adjustable). These are the  blue model's which are for race handling use. Best for cars sitting 2" or more below factory height. For use with much  firmer than factory spring rates. Best for use with lowering...

  Black T3 Camber Plates. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...

Our 45MM Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes the longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that has...

New Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...