5429912711
Skip to main content
Sidebar Sidebar Sidebar
  • Weld On Coilover Kit Weld On Coilover Kit
    Weld On Coilover Kit
    Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...
    $325.00
  • T3 CP107 Camber Plates T3 CP107 Camber Plates
    T3 CP107 Camber Plates
      T3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...
    $325.00
  • Tall Lever Short Shift Kit Tall Lever Short Shift Kit
    Tall Lever Short Shift Kit
    This is our latest variation on our short shift kit. Over the years, we've had several requests for a "Tall Shifter". Our own Formula D AE86 used a long shifter to postion the shift lever higher and closer to the steering wheel for quick adjustments...
    $285.00
    Add to Cart The item has been added
  • Short Shift Kit Short Shift Kit
    Short Shift Kit
    Our T3 Short Throw Shifter features a 55% reduction in throw. Yes! That is 55% reduction vs. TRD's 33% Reduction in throw. COMPLETE BOLT IN UNIT. What you see pictured is what you get. Our kit includes: A complete set of 3 Delrin bushings for a...
    $285.00
    Add to Cart The item has been added
  • Rear Short Stroke Shocks Rear Short Stroke Shocks
    Rear Short Stroke Shocks
    We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...
    $230.00
  • ITG Filter System for 40mm Carbs
    ITG Filter System for 40mm Carbs
      We designed a backing plate that perfectly mounts up to the 40mm Mikuni, Webber and Solex carbs and allows the usage of the ITG Filtration system. Our velocity stacks fit perfectly inside as well! Quick Release system to easily remove the filters...
    $95.00
  • Velocity Stacks For Carburetors Velocity Stacks For Carburetors
    Velocity Stacks For Carburetors
      Techno Toy Tuning Velocitiy Stacks for the Weber, Mikuni, and Solex carburetors. Solid billet construction, these are machined from one piece of aluminum from beginning to end. Fully radiused mouth for maximum airflow potential. Availabe in 40mm,...
    $245.00
  • T3 x Swift Japan Springs Pair      T3 x Swift Japan Springs Pair
    T3 x Swift Japan Springs Pair
      Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...
    $180.00
  • HyperCo Helper Spring Kit HyperCo Helper Spring Kit
    HyperCo Helper Spring Kit
    Do you like to run your car low and deal with an excessive amount of droop that unseats the springs? Or maybe you're just tired of hearing a clunk when 3 wheeling out of driveways. Our new HyperCo Helper Spring Kit is the perfect solution for these...
    $150.00
    Add to Cart The item has been added
  • HyperCo Coilover Springs HyperCo Coilover Springs
    HyperCo Coilover Springs
      HyperCo Coilover Springs are the top choice of winning race car drivers and drifters worldwide! Proven in Indy, IMSA, and F1 to perform consistently, season after season. Advanced metallurgy, spring winding, and heat treating techniques...
    $145.00
    Add to Cart The item has been added
Your cart is empty

Most Popular