5429912711
Skip to main content
  • Weld On Coilover Kit Weld On Coilover Kit
    Weld On Coilover Kit
    Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...
    $325.00
  • Mitsubishi Starion Camber Plates
    Mitsubishi Starion Camber Plates
    These are our camber plates specifically designed for the Mitsubishi Starion. Because of the heavier weight of the Starion, we used steel upper plates and plated them in bright silver zinc. The bearings on these are inserted into the aluminum blocks...
    $325.00
  • T3 x Swift Japan Springs Pair      T3 x Swift Japan Springs Pair
    T3 x Swift Japan Springs Pair
      Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...
    $180.00
  • HyperCo Helper Spring Kit HyperCo Helper Spring Kit
    HyperCo Helper Spring Kit
    Do you like to run your car low and deal with an excessive amount of droop that unseats the springs? Or maybe you're just tired of hearing a clunk when 3 wheeling out of driveways. Our new HyperCo Helper Spring Kit is the perfect solution for these...
    $150.00
    Add to Cart The item has been added
  • HyperCo Coilover Springs HyperCo Coilover Springs
    HyperCo Coilover Springs
      HyperCo Coilover Springs are the top choice of winning race car drivers and drifters worldwide! Proven in Indy, IMSA, and F1 to perform consistently, season after season. Advanced metallurgy, spring winding, and heat treating techniques...
    $145.00
    Add to Cart The item has been added
  • T3 60mm Billet Horn Button T3 60mm Billet Horn Button
    T3 60mm Billet Horn Button
    Upgrading to a nice Aftermarket Steering Wheel can really change your perception of a vehicle. The look and feel of it in the hands will have you thinking "this is a freakin' Racecar!"  Typically these nice Italian Steering Wheels are...
    $110.00
  • T3 55mm Billet Horn Button T3 55mm Billet Horn Button
    T3 55mm Billet Horn Button
    Upgrading to a nice Aftermarket Steering Wheel can really change your perception of a vehicle. The look and feel of it in the hands will have you thinking "this is a freakin' Racecar!"  Typically these nice Italian Steering Wheels are finished off with a...
    $110.00
  • T3 Toe Plates T3 Toe Plates
    T3 Toe Plates
    Our Toe Plates are a quick way to adjust your cars alignment at the track! With the plates resting against your wheels, you can simply use 2 tape measures to adjust your cars toe in or out! We also included a Bottle Opener in our plates in case you get...
    $105.00
    Add to Cart The item has been added
  • Camber Plate Upper Hat System
    Camber Plate Upper Hat System
    The Camber Plate Upper Hat System is available for any car using coilovers. It can also be utilized with most other camber plates on the market, including Cusco and Cusco-Clone camber plates.
    $105.00
    Add to Cart The item has been added
  • Riser Blocks for Camber Plates Riser Blocks for Camber Plates
    Riser Blocks for Camber Plates
    If you are using our camber plates and need a little more height, these riser blocks are the ticket.  These gold blocks click into place between the camber plate bearing block and the camber plate, giving 1" additional height. These will work with...
    $95.00
    Add to Cart The item has been added
  • Hub Extender Adapter for Steering Wheels Hub Extender Adapter for Steering Wheels
    Hub Extender Adapter for Steering Wheels
    Machined hub extender with all the patterns for Nardi, Momo, Personal, and Sparco format steering wheels. We make these in 50mm long, and in 75mm long. Comes with all stainless allen head bolts for a very nice look. Available in Grey Anodize or Wrinkle...
    $85.00
  •  Conical Upper Hats for Coilovers with 2.5" ID springs
    Conical Upper Hats for Coilovers with 2.5" ID springs
    Sold in Pairs. Machined Aluminum conical upper hats for use on DIY coilovers.  Specifically designed for use with 2.5" ID coilover springs. Center bore is 22mm. If you are ordering our weld on coilover kit, you do NOT need to order these separately...
    $45.00
    Add to Cart The item has been added
Your cart is empty

Most Popular