This is a front aero lip splitter for the S30 chassis by Skillard!
It is designed to work with the Type 1 air dam and it ties into the core support and cross member (it has also been used by many customers with the Xenon air dam).
It comes with turnbuckles, brackets and other hardware needed to mount to the existing tow hook and front bumper mounting points on the S30Z. Made with 1/8″ thick aluminum, it serves to increase handling and downforce on the front end of the car.
The splitter is available in two versions. First one extends about 4-inches out from the lower edge of the front air dam. For a more subtle look the second version only extends about 2-inches, serving to slice the air just before it hits the front of the car.
Air hitting the front of the car goes up and over, through the engine bay, and down and under the car. The splitter BLOCKS that air from turning downward — that downward moving air hitting the splitter helps add downward force to the front of the car, reducing front end lift and increasing front end traction, and results in LESS air going under the car, which helps with downforce as well. The fact that the splitter extends back almost 3 feet, resulting in a smooth front undercarriage, also helps with the downforce equation (notice that almost all professional high-speed race cars have an underbody that is as smooth as possible and many even run front splitters).
*Chassis mounting points will slightly differ on the 240Z and will also require 2 longer bolts and spacers to attach to the core support that are currently not included.
**NOTE: Turnbuckles included in kit B are now larger than shown in the installation video.
