Techno Toy Tuning

Under racing conditions, keeping your brake fluid cool is an absolute must. Our brake master cylinder heat shield helps keep your fluid temperature down. Precisely laser cut from 6061 aluminum,...

We've been asked several times over the years to come up with a comprehensive budget kit to transform the handling on the AE86. This is an absolute minimum cost "no compromises" kit to turn your...

We've been asked several times over the years to come up with a comprehensive budget kit to transform the handling on the TE72. This is an absolute minimum cost "no compromises" kit to turn your...

The S14 is a resonably rigid chassis, but we've noticed that some simple mods can very much so improve the chassis stiffness. This bar uses the two factory built in threaded sockets on the rear...

  The C-Pillar bar ties the body together at the seat belt mounting points to help re-inforce the chassis. Available in wrinkle black. Sticker does not come pre-installed. That is up to...

The AE86 Coupe is a very rigid chassis, but we've noticed that some simple mods can very much so improve the chassis stiffness. This bar uses the two factory built in threaded sockets on the rear...

The large rectangular opening for the rear hatch allows a lot of chassis flex on the RA64/65 Hatchback. This bar uses the two factory built in threaded sockets on the rear C-Pillars and helps to tie...

  This bar uses the two factory built in threaded sockets on the rear C-Pillars and helps to tie the whole chassis together preventing flex in the rear end.  Made from lightweight but...

  Black Camber Plates for the 240SX. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go...

We are happy to release our camber plates specifically designed for the 1st gen RX7. Since the SA and FB guys are really stepping up their interest, we've re-designed the camber plates to fit the SA,...

On this particular chassis car, the cars came with 3 different strut top patterns. Please look at the diagram above, measure the strut top on your car, and choose your camber plate design accordingly...