Corolla

One of the weak points in the AE86 chassis, is the half frame rails on the unibody. The factory frame rails extend to just behind the seat area, and and then thin out. There is a break in the rails, then they pick up again by the forward 4 link pickup...

We now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...

All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...

  Front and rear crossdimpled and slotted rotors are now available for the AE86! These are direct replacements for the factory units. Add some performance and looks to the stock braking system! Available as a full set, or pairs. In slotted, or...

Upgrading to 2nd gen FC3S calipers on the AE86 has been popular for decades now.  These brackets allow you to use FC or FD RX7 calipers and the 2002 Mini Cooper S rotors on the AE86. The 276MM Mini Cooper S rotors are readily available and very...

AE86 Replacement Caliper Brackets For people switching to AE86 strut casings and hubs, finding the OEM caliper brackets can be difficult, so we decided to make some from scratch! These are just under 1 Lb lighter than factory and come with both right...

This Lateral bar is specifically designed to help swap the 79-83 Celca Supra Rear end into the AE86 Corolla.  This has the longer length and proper bushings sizes required for the swap. Please be sure to check out our Celica Supra Conversion 4 Links as...

We designed these specifically to hold up to the use and abuse of our Rally customers in the Bahamas, Australia, Eastern Africa and Northern Europe. These are the strongest traction brackets in production for the AE86, guaranteed. These will eliminate...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this lateral rod is SUPER tight! The original bolt for the...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

With the age of the AE86 now older than 30 years, the more they are driven the more the chassis flexes, this can be detrimental to the strength. But we have the answer with our AE86 Front Chassis Strengthening kit, so whether you’re drifting, rallying,...