Suspension

New Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...

Swift Japan REAR lowering springs (pair) for the AE86 Corolla.  Swift is a high end spring manufacturer from Japan and provides top quality springs. These are a direct fit onto the rear of the AE86 Corolla and will drop the rear of the car a good solid...

Brand new front +15mm front lower control arms for the Corolla. Looking for an affordable way to freshen up that front end? Need new ball joints? trashed bushings? want a bit more camber or stance? Here's a simple bolt on solution! These will widen...

We now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...

This Lateral bar is specifically designed to help swap the 79-83 Celca Supra Rear end into the AE86 Corolla.  This has the longer length and proper bushings sizes required for the swap. Please be sure to check out our Celica Supra Conversion 4 Links as...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this lateral rod is SUPER tight! The original bolt for the...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

Meet our Evolved RCA's for the KE30 Corolla and all other 87mm strut spacing Toyotas! Using very clever geometry and hardware, these units can be used as a normal Roll Center Adjuster, Ackermann Adjust Roll Center Adjuster or Negative Camber Roll Center...

Meet our new Evolved RCA's for the AE86 and all other 85mm strut spacing Toyotas! Using very clever geometry and hardware, these units can be used as a normal Roll Center Adjuster, Ackermann Adjust Roll Center Adjuster or Negative Camber Roll Center...

  Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...

Do you like to run your car low and deal with an excessive amount of droop that unseats the springs? Or maybe you're just tired of hearing a clunk when 3 wheeling out of driveways. Our new HyperCo Helper Spring Kit is the perfect solution for these...