Suspension

Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...

On this particular chassis car, the cars came with 3 different strut top patterns. Please look at the diagram above, measure the strut top on your car, and choose your camber plate design accordingly. The bearings on these are inserted into the aluminum...

New Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...

We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...

Swift Japan REAR lowering springs (pair) for the AE86 Corolla.  Swift is a high end spring manufacturer from Japan and provides top quality springs. These are a direct fit onto the rear of the AE86 Corolla and will drop the rear of the car a good solid...

We now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...

This Lateral bar is specifically designed to help swap the 79-83 Celca Supra Rear end into the AE86 Corolla.  This has the longer length and proper bushings sizes required for the swap. Please be sure to check out our Celica Supra Conversion 4 Links as...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this lateral rod is SUPER tight! The original bolt for the...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

Meet our new Evolved RCA's for the AE86 and all other 85mm strut spacing Toyotas! Using very clever geometry and hardware, these units can be used as a normal Roll Center Adjuster, Ackermann Adjust Roll Center Adjuster or Negative Camber Roll Center...

  Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...