-
Front Coilover Conversion for MX63 Cressida
Building and Tuning Coilover's for Classic Japanese Cars is something that we have offered for the past 20 years! Over that time, we've tested lots of Shock and Spring options to find what works best for each specific chassis! Our Street Spec builds will...
$1,175.00 - $1,700.00 -
4-Links for MX62/MX63 Sedan and Wagon
Rod ends are massive 3-piece teflon-lined, making them self lubricating and eliminating the need for a zirc fitting. Â All spacing hardware is CNC'd Stainless Steel. Also known as rear trailing arms, our Rear Four Links feature Heim joints (Spherical...
$545.00 -
85mm/90mm SUPER Evolved Knuckles for Just About Every Old School Toyota
Our SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...
$355.00 -
TRD Short Stroke Adjustable Shocks
TRD Short Stroke Race Dampers (adjustable). These are the blue model's which are for race handling use. Best for cars sitting 2" or more below factory height. For use with much firmer than factory spring rates. Best for use with lowering...
$330.00 - $490.00 -
Bolt-on Coilover Kit
Our Front Bolt-On Coilover Kit was designed as a "slip on" option for those using full length shocks and looking for the ability to adjust their ride height. It includes short sleeves, spring perches, upper hats, and your choice of spring rate!...
$325.00 - $385.00 -
Weld On Coilover Kit
Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate! The kit was designed for the "do it yourselfer" that...
$325.00 - $385.00 -
Tension Control Rods for MX63/MX62 Cressida
 All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4"...
$325.00 - $340.00 -
T3 CP107 Camber Plates
T3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...
$325.00 - $410.00
![heading-img](http://cdn11.bigcommerce.com/s-xnicctrynw/images/stencil/original/image-manager/category-page-heading-banner.png)
WHAT ARE YOU SHOPPING FOR TODAY ?
Suspension
Show Filter Side Bar
Showing 1 to 8 of 24