5429912711
Skip to main content
  • Feal Suspension 441Coilovers for ZZW30 MR2
    Feal Suspension 441Coilovers for ZZW30 MR2
    Each shock is designed with expertise from our success in many top-level international motorsports and through years of experience tuning various shock brands. We at Feal Suspension strongly believe that our coilovers have an edge on shock...
    $1,540.00
  • Front Camber Plates for the ZZW30 MR2 Spyder Front Camber Plates for the ZZW30 MR2 Spyder
    Front Camber Plates for the ZZW30 MR2 Spyder
    The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them. What we do is freeze the...
    $325.00
  • Rear Camber Plates for the ZZW30 MR2 Spyder Rear Camber Plates for the ZZW30 MR2 Spyder
    Rear Camber Plates for the ZZW30 MR2 Spyder
    The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them. What we do is freeze the...
    $325.00
    Add to Cart The item has been added
  • T3 Front Sway Bar for the ZZW30 MR2 T3 Front Sway Bar for the ZZW30 MR2
    T3 Front Sway Bar for the ZZW30 MR2
    For those needing less body roll and flatter handling in their MR2 Spyder, our new T3 Front Sway Bar is the best way to go! We've designed our Front Sway Bar to be stiffer than other available options on the market to meet the demands of track focused...
    $275.00
    Add to Cart The item has been added
  • Ultimate Tie Rod Package for the ZZW30 MR2 Spyder Ultimate Tie Rod Package for the ZZW30 MR2 Spyder
    Ultimate Tie Rod Package for the ZZW30 MR2 Spyder
    Check out our new Ultimate Tie Rod Package for the ZZW30 MR2 Spyder!  We started off by updating the Inner Tie Rods from the OE 12mm to high quality 14mm units. This provides added strength and leverage!  Then we used very strong 5/8" bore rod ends...
    $265.00
  • Rear Traction Links for the ZZW30 MR2 Spyder Rear Traction Links for the ZZW30 MR2 Spyder
    Rear Traction Links for the ZZW30 MR2 Spyder
    All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...
    $265.00
    Add to Cart The item has been added
  • Rear Lower Control Arms for the ZZW30 MR2 Spyder Rear Lower Control Arms for the ZZW30 MR2 Spyder
    Rear Lower Control Arms for the ZZW30 MR2 Spyder
    All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...
    $225.00
  • Rear Toe Links for the ZZW30 MR2 Spyder Rear Toe Links for the ZZW30 MR2 Spyder
    Rear Toe Links for the ZZW30 MR2 Spyder
    All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...
    $225.00
    Add to Cart The item has been added
  • T3 x Swift Japan Springs Pair      T3 x Swift Japan Springs Pair
    T3 x Swift Japan Springs Pair
      Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...
    $180.00
  • Rear Knuckle Bearings for ZZW30 MR2 Spyder Rear Knuckle Bearings for ZZW30 MR2 Spyder
    Rear Knuckle Bearings for ZZW30 MR2 Spyder
    With the ZZW30 MR2 Spyder being a 20 year old car it's a good idea to replace all worn suspension joints especially if upgrades have been made to other suspension components. The Spyder's Rear Knuckle Bearing performs the important function of...
    $160.00
    Add to Cart The item has been added
Your cart is empty

Most Popular