-
ST162, ST184 and ST185 Celica Camber PlatesSpecifically designed for the Celica, these allow increased caster adjustment as well as camber. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings...$325.00 -
45MM Weld-on Front Coilover KitOur 45MM Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes the longer sleeves, weld on perches, upper hats, and your choice of spring rate! The kit was designed for the "do it yourselfer" that has...$325.00 -
T3 CP107 Camber PlatesT3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...$325.00 -
AE82 FX16 FX Corolla/Levin Camber PlatesThe bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them. What we do is freeze the...$325.00 -
Tension Control Rods for the RA40 Celica All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4"...$325.00 -
Camber Plates for MX73 CressidaWe've done a small run of the special edition black camber plates for the MA60 and MX73. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into...$325.00 -
Black Camber Plates for MA60 SupraWe've done a small run of the special edition black camber plates for the MA60 and MX73. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into...$325.00 -
Tension Control Rods for AW11 MR2Will allow caster adjustment from 3 degrees to 8 degrees or more with no probems. All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm...$325.00 -
Tension Control Rods All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4"...$325.00 -
Front AW11 MR2 Camber PlatesSpecifically designed for the AW11 MR2, these are a direct bolt in solution for all year 1st gen MR2's. These will fit both 4 and 3 bolt models. Mounting bolts use a slotted fitting to allow for 1 to 2 degrees of extra caster adjustment. The bearings...$325.00Add to Cart The item has been added -
T3 Tension Control RodsNew Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...$325.00 -
Racing Seat Rails for the A60Our RA64/MA60 Racing Seat Rails are now ready! These will accommodate very short to very tall drivers with no problems! Fully adjustable for height and tilt. Design allows you to fit the seat between the seat rails and down super low. All...$315.00Add to Cart The item has been added
Evolved Front Crossmember for the 240/260/280z
Introducing our Evolved Front Crossmember for the 240/260/280z! This work of art is our latest improvement to the 50 year old S30 chassis and it's handling characteristics!
We've designed this...
$695.00
Add to Cart
The item has been added