Suspension

Our Billet Steering Rack Clamps for the 240/260/280Z are machined from 6061 Aluminum for increased strength and rigidity over the factory stamped steel units.   Sold as a pair.  

If you have 240Z hubs, but wish to convert the backside offset to that of the 260Z or 280Z (If you have 260Z or 280Z brakes), then these these hub rings will do the trick. Machined for both 4 and 5 lug bolt patterns, these add the extra thickness of the...

Our Fancy Swaybar Clamps for the Z car are a beefy billet upgrade over the usual bent steel units. They pair perfectly with our billet aluminum Dogbone as well as our steel Dogbone and T3 Rear Swaybar! These will work with...

Over the years we have found that the S30 Z's Rear Lower Control Arms like to Toe-Out under acceleration. To minimize this problem we have created Solid Rear Lower Control Arm Bushings that offer zero deflection!  CNC Machined Bushings from self...

Did you convert your Z's Rear End to a Ford 8.8? Finding Studs to match the Nissan thread pitch is impossible so we had custom one's made!  These studs are sold in a set of ten and are 12x1.25 thread pitch with knurl to fit the BEEFY 2015 and up...

Looking for a simple solution for adjusting the rear camber and toe on the Z car? Here's the ticket!  Made from billet aluminum, anodized grey and using delrin inserts, these are a quick and easy direct install. Gives up to 2 degrees camber adjustment...

If you are using our camber plates and need a little more height, these riser blocks are the ticket.  These gold blocks click into place between the camber plate bearing block and the camber plate, giving 1" additional height. These will work with...

The original steering column on the 240Z includes a rubber "rag joint" between the U-joints. This can cause a vague and un-responsive steering feel. This billet aluminum steering coupler will drastically improve the steering feel and feedback of the...

Finding inner tie rods can be a real bear for the Z cars. These inner tie rods are thankfully now available.  Direct fit to the 240Z, 260Z and 280Z.  These inner tie rods are only available in right hand threads, so please choose your outer tie rods...