-
Four Corner Coilover kit for the FX16 CorollaOur Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes the longer sleeves, weld on perches, upper hats, and your choice of spring rate! The kit...$790.00 -
Frame Rail Extensions for AE86 CorollaOne of the weak points in the AE86 chassis, is the half frame rails on the unibody. The factory frame rails extend to just behind the seat area, and and then thin out. There is a break in the rails,...$225.00 -
Front 4/5 Lug Hubs For the S13 240sxNew 4/5 Lug Front Hubs for the S13 240sx/Silvia! We've adapted our S14 Hubs to S13 Spindles with a machined Spacer and Keyed Washer! Available in with Standard Length or Extended Length Studs...$220.00 -
Front 4/5 Lug Hubs for the S14New OE 4/5 Lug Front Hubs for the S14 240sx/Silvia! Available in with Standard Length or Extended Length Studs. Select the pattern/stud length of your choice and we will press the studs in for...$220.00 -
Front and Rear Tow Hook Combo (S30 – 240Z / 260Z)These are not your standard "Cosmetic" and "Universal" tow hooks. These tow hooks are the real thing and completely capable of pulling the "Wayward Drifter" or "Traction-Challenged Road Racer" out...$105.00 -
Front AW11 MR2 Camber PlatesSpecifically designed for the AW11 MR2, these are a direct bolt in solution for all year 1st gen MR2's. These will fit both 4 and 3 bolt models. Mounting bolts use a slotted fitting to allow for 1...$325.00Add to Cart The item has been added -
Front Billet Hubs (AE86 - Corolla / Levin / Trueno)Our billet AE86 hubs are now availalbe in a dual 4 lug, 5 lug layout! These are direct replacements for the facotory units, and weigh in at 2lb's lighter EACH than the factory steel units. These...$665.00 -
Front Camber Plates for the ZZW30 MR2 SpyderThe bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the...$325.00 -
Front Lower Control Arms (S30 – 240Z / 260Z / 280Z)Fully Fabricated steel lower control arms (No used OEM parts)! Double adjustable hardware (extend or shorten on car, no unbolting) OEM-style ball joints, strongest option, easy replacement. All...$495.00 -
Front Lower Control Arms for Corolla and CelicaFully Fabricated steel lower control arms (No used OEM parts)! Double adjustable hardware (extend or shorten on car, no unbolting) OEM-style ball joints, strongest option, easy replacement. Length...$495.00 -
Front Lower Control Arms for Datsun 510Fully Fabricated steel lower control arms (No used OEM parts)! Double adjustable hardware (extend or shorten on car, no unbolting) OEM-style ball joints, strongest option, easy replacement. All...$495.00 -
Front Lower Control Arms for the SA and FB RX7Fully Fabricated steel lower control arms (No used OEM parts)! Double adjustable hardware (extend or shorten on car, no unbolting) Off the shelf ball joints, strongest option, easy replacement...$445.00
Evolved CV Axles for the Long Nose R180/R200 (510 / S30 – 240Z / 260Z / 280Z)
After a few years and several revisions, we have EVOLVED our Long Nose R180/R200 CV Axles! Increased strength for high horsepower, improved articulation for lowered vehicles, modular design for...
$1,350.00
Add to Cart
The item has been added
