Suspension

Championship Winning Performance: ClubSpec Pro is for dedicated track enthusiasts that want a stiffer spring rate with a more track-oriented valving package. ClubSpec Pro was designed to be the fastest single adjustable damper on the market. Annex...

Something a little special for the ZZW30 MR2 Spyder owners! Our new GTX2 Lower Control Arms are now available. These units replace the factory front lower control arms! . Specs: Fully adjustable on car Up to +30MM extra track Full Caster adjustment 13MM...

The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them. What we do is freeze the...

The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them. What we do is freeze the...

For those needing less body roll and flatter handling in their MR2 Spyder, our new T3 Front Sway Bar is the best way to go! We've designed our Front Sway Bar to be stiffer than other available options on the market to meet the demands of track focused...

Check out our new Ultimate Tie Rod Package for the ZZW30 MR2 Spyder!  We started off by updating the Inner Tie Rods from the OE 12mm to high quality 14mm units. This provides added strength and leverage!  Then we used very strong 5/8" bore rod ends...

All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...

All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...

All hardware plated providing a finish tough as nails. Solid 1" aluminum, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also...

  Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...

With the ZZW30 MR2 Spyder being a 20 year old car it's a good idea to replace all worn suspension joints especially if upgrades have been made to other suspension components. The Spyder's Rear Knuckle Bearing performs the important function of...