-
Front Coilover Conversion for MX63 CressidaBuilding and Tuning Coilover's for Classic Japanese Cars is something that we have offered for the past 20 years! Over that time, we've tested lots of Shock and Spring options to find what works best for each specific chassis! Our Street Spec builds will...$1,175.00
-
T3 Rear CoiloversWe now offer 3 different levels of damping choices for our Rear Coilovers to fit your budget and specific driving needs! All of our rear coilovers are built around high-quality Japanese short stroke dampers and come standard with HyperCo Springs in the...$845.00
-
4-Links for MX62/MX63 Sedan and WagonRod ends are massive 3-piece teflon-lined, making them self lubricating and eliminating the need for a zirc fitting. Â All spacing hardware is CNC'd Stainless Steel. Also known as rear trailing arms, our Rear Four Links feature Heim joints (Spherical...$545.00
-
85mm/90mm SUPER Evolved Knuckles for Just About Every Old School ToyotaOur SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...$355.00
-
Bolt-on Coilover KitOur Front Bolt-On Coilover Kit was designed as a "slip on" option for those using full length shocks and looking for the ability to adjust their ride height. It includes short sleeves, spring perches, upper hats, and your choice of spring rate!...$325.00
-
Weld On Coilover KitOur Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate! The kit was designed for the "do it yourselfer" that...$325.00
-
Tension Control Rods for MX63/MX62 Cressida All solid steel construction  All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design, providing the maximum in rigidity Three piece precision rod ends with 3/4"...$325.00
-
T3 CP107 Camber PlatesT3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...$325.00
-
Front Short Stroke ShocksWe now offer 3 different levels of Front Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...$280.00
-
Rear Short Stroke ShocksWe now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...$230.00
-
HyperCo Rear Lowering Springs 5.0" O.D.HyperCo Rear Lowering Springs 5" O.D. These springs will drop the rear of the car 2 to 2.5" Available in a wide variety of Spring rates. E-mail us after your order to choose your spring rates.$250.00
-
Weld-On Lower Control Arm KitWe now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...$235.00
Evolved Front Crossmember for the 240/260/280z
Introducing our Evolved Front Crossmember for the 240/260/280z! This work of art is our latest improvement to the 50 year old S30 chassis and it's handling characteristics!
We've designed this...
$695.00