Suspension

Building and Tuning Coilover's for Classic Japanese Cars is something that we have offered for the past 20 years! Over that time, we've tested lots of Shock and Spring options to find what works best for each specific chassis! Our Street Spec builds will...

  Something a little special for the MA60, and other large ball joint Toyota's! Our new GTX2 Lower Control Arms are now available. These units replace the factory front lower control arms AND caster (TC) rods. Specs: Fully adjustable on car Up to...

We are proud to release our new SUPER Evolved Knuckles(steering arms) and outer tie rods for Toyota's. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The...

Our SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...

  Our Front Bolt-On Coilover Kit was designed as a "slip on" option for those using full length shocks and looking for the ability to adjust their ride height. It includes short sleeves, spring perches, upper hats, and your choice of spring rate!...

Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...

We've done a small run of the special edition black camber plates for the MA60 and MX73. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into...

New Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...

Our new MA60/MA61 Solid Rear Subframe Bushings are a great solution for tightening up the rear diff and suspension in your Supra! On top of that, we've reduced the overall height of the bushings to help correct some of the excessive camber and toe...

We now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

Meet our new Evolved RCA's for the MA60/RA64 and all other 90mm strut spacing Toyotas! Using very clever geometry and hardware, these units can be used as a normal Roll Center Adjuster, Ackermann Adjust Roll Center Adjuster or Negative Camber Roll Center...