Techno Toy Tuning

To reduce flex from the rear suspension of the S30 Z we've designed Rear Power Braces that will tie the lower control arm mounting points together!  The braces run under the pivot point of the rear...

This is a tri bar add-on for our Z rear strut braces. Light weight aluminum construction, machined brackets, and spherical rod end construction with right/left hand threading for an exact adjustable...

This is a Tri-Bar Add-on for our Z rear strut braces. Light weight aluminum construction, machined brackets, and spherical rod end construction with right/left hand threading for an exact adjustable...

  Looking to put the 88-92 Toyota 4Runner V6 4 piston S12W calipers and 1985 300ZX  vented rotors on the front of your Z? We've got the hardware! These rotor spacers make the swap...

S30 240Z, 260Z and 280Z transmission mount. This unit replaces type 1 and type 2 tranny crossmembers in the above diagram. Take a peek under your car to check which one you need as it is fairly easy...

Die hard L- Series S30 owners we have something special for you! Our Z Type 3 Transmisssion Crossmember for the Nissan 240SX Transmission can help you properly install a KA24 transmission behind your...

S30 240Z, 260Z and 280Z transmission mount. This unit replaces type 3 tranny crossmembers in the above diagram. Take a peek under your car to check which one you need as it is fairly easy to tell...

Our 4AGZE crank pulley is 175mm in diameter for high boost on the GZE. On a bone stock 4AGZE this should raise the boost to around 14PSI. If your engine has a much larger intercooler, you will not...