Advanced Strut Tube Spacers for Toyota Struts


Create Wishlist

Size *

People had been asking us to make a type of strut tube spacer that puts the shock insert at the BOTTOM of the strut casing on a full length strut casing, so we did!

These are considered to be an "upper strut tube spacer".

This Advanced strut tube spacer is machined from solid billet steel and is actually a gland nut with a spacer built in, specifically designed to cup the upper portion of the KYB AGX shock.

What this is used for:

  1. Running the SW20 KYB AGX in a full length strut casing with NO modifications to the strut casings.
  2. Perfect for putting the shock in the correct range of use when using coilovers. (No more "bouncy" shocks because they are over compressed)
  3. Can be used with bolt on Coilovers OR lowering springs, with no adverse effects
  4. Can be used with other short stroke shock options with small shims under the shock.

This is the EASY answer for those that want to run lowering springs and achieve the same handling as coilovers WITHOUT shortening the strut casing!

We make these in two sizes:

Tall size for use with MR2 front inserts.

Medium size for use with MR2 rear inerts.

Please choose the size that you need carefully.