AE86

One of the weak points in the AE86 chassis, is the half frame rails on the unibody. The factory frame rails extend to just behind the seat area, and and then thin out. There is a break in the rails,...

Upgrading to 2nd gen FC3S calipers on the AE86 has been popular for decades now.  These brackets allow you to use FC or FD RX7 calipers and the 2002 Mini Cooper S rotors on the AE86. The 276MM Mini...

AE86 Replacement Caliper Brackets For people switching to AE86 strut casings and hubs, finding the OEM caliper brackets can be difficult, so we decided to make some from scratch! These are just...

This Lateral bar is specifically designed to help swap the 79-83 Celca Supra Rear end into the AE86 Corolla.  This has the longer length and proper bushings sizes required for the swap. Please be...

We designed these specifically to hold up to the use and abuse of our Rally customers in the Bahamas, Australia, Eastern Africa and Northern Europe. These are the strongest traction brackets in...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this...

These are our upgraded OE style outer tie rods for the AE86 Corolla. We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are...

We are now stocking Super Small Brake Booster's for the AE86! With a diameter of 140mm vs the stock 220mm diameter, this booster offers increased clearance for turbo set ups in LHD cars or room to...

With the age of the AE86 now older than 30 years, the more they are driven the more the chassis flexes, this can be detrimental to the strength. But we have the answer with our AE86 Front Chassis...

Shock Tower Plates, also known as Shakitto Plates for the AE86 Corolla. These tie the strut towers to the very thick double walled section of the firewall, greatly reinforcing the strut towers...