AE86

  Replaces those rotted rubber lines on your AE86! These high performance braided brake lines will provide a much more solid pedal feel. The Full Set Kit comes with the full 5 lines; 2 front lines, the rear line from diff to chassis and the 2 lines...

The large rectangular opening for the rear hatch allows a lot of chassis flex on the AE86. This bar uses the two factory built in threaded sockets on the rear C-Pillars and helps to tie the whole chassis together. Made from lightweight but strong DOM...

If you have ever removed the front Subframe from your AE86, you may have noticed that it was designed to have a bit of play between the bolts and subframe. Over time the holes enlarge and allow the subframe to shift as you hit bumps in the road. We have...

Get that steering angle! Prevent spinouts while drifting, turn U-turns in the In-N-Out parking lot that will amaze your friends! Techno Toy Tuning now has AE86 High Angle Rack Spacers available.  Made from Chromoly for added strength.  These will fit...

Sometimes you just need your car to be a little higher in the back. New wheels, tires, different driving conditons etc... Or maybe you got your AE86 with cut TRD or Swift Springs or such and it is just a bit too low! Our rear spring spacers will fix...

Many of us remove the rear interior from our AE86.  These panels are a replacement for the plastic panel that covers the tail light in the AE86 Hatchback. Panel is a bolt in part, using factory mounting points. Made from .050 aluminum, very light...

Many builds require extra room for turbo's and such and leave no room for the brake booster. Some people like the firmer feel of manual brakes when racing. Others yet have found it nearly impossible to find a replacement booster in their local auto parts...

These floor plates are to be mounted directly to the floor. They give you a flat service for your feet rather than the irregular surface of the floor. They also help isolate your racing shoes from the heat that can come through the floor board. From...

 Reinforce the mounting area around your rear shock towers. These are precision laser cut from .100" cold rolled steel which is also thick enough to be used for a mounting point for roll cages. Boxes will come TIG welded together as shown. Final...