AE86

This Lateral bar is specifically designed to help swap the 79-83 Celca Supra Rear end into the AE86 Corolla.  This has the longer length and proper bushings sizes required for the swap. Please be sure to check out our Celica Supra Conversion 4 Links as...

We designed these specifically to hold up to the use and abuse of our Rally customers in the Bahamas, Australia, Eastern Africa and Northern Europe. These are the strongest traction brackets in production for the AE86, guaranteed. These will eliminate...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this lateral rod is SUPER tight! The original bolt for the...

These are our upgraded OE style outer tie rods for the AE86 Corolla. We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long lasting (just like all our other rod...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

We are now stocking Super Small Brake Booster's for the AE86! With a diameter of 140mm vs the stock 220mm diameter, this booster offers increased clearance for turbo set ups in LHD cars or room to run 100mm velocity stacks in RHD cars! They are an...

With the age of the AE86 now older than 30 years, the more they are driven the more the chassis flexes, this can be detrimental to the strength. But we have the answer with our AE86 Front Chassis Strengthening kit, so whether you’re drifting, rallying,...

We now have hard to find Door Hinges for the AE86! These are heavy duty replacements from a later model Toyota and should be a long lasting fix for sagging doors on your old car!  These may fit other Toyota's from the same era such...

Shock Tower Plates, also known as Shakitto Plates for the AE86 Corolla. These tie the strut towers to the very thick double walled section of the firewall, greatly reinforcing the strut towers. These will help eliminate chassis flex and suspension...

Factory rubber bushings were never meant to take much abuse and the sloppiness in your suspension can be considered a direct result. Prothane's urethane suspension bushings were developed to control torque and deflection, giving you a noticeable...

Blitz Front Strut Tower Bar  Lightweight hollow aluminun bar with wrinkle black finish. Steel strut tower plates with candy red finish. 

Hard to beat Toda's quality when it comes to 4AG performance parts! This timing belt fits all model 16V 4AG's, including the 4AGZE.