RA64

  T3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...

New Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...

  Our RA64/MA60 Racing Seat Rails are now ready! These will accommodate very short to very tall drivers with no problems! Fully adjustable for height and tilt. Design allows you to fit the seat between the seat rails and down super low. All...

Our new MA60/MA61 Solid Rear Subframe Bushings are a great solution for tightening up the rear diff and suspension in your Supra! On top of that, we've reduced the overall height of the bushings to help correct some of the excessive camber and toe...

Stanley Electric Raybrig Headlights have been popular on the touge for years because of their ultra bright halogen bulbs and crystal clear lenses!  At the end of 2020 parent company Stanley Electric discontinued the classic version of these lights. They...

We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...

Swift Japan REAR lowering springs (pair) for the AE86 Corolla.  Swift is a high end spring manufacturer from Japan and provides top quality springs. These are a direct fit onto the rear of the AE86 Corolla and will drop the rear of the car a good solid...

We now have do it yourself weld on lower control arm kits! For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars! These...

We designed these to the highest possible standards. No skimping on the expensive parts here. All Heim joints at both ends with metric sizes for a direct fit! Zero Slop, and Zero Deflection - this lateral rod is SUPER tight! The original bolt for the...

  These are the same custom Outer Tie Rods we've been offering for the AE86 and other cars for years now! We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to keep them quiet and long...

Meet our new Evolved RCA's for the MA60/RA64 and all other 90mm strut spacing Toyotas! Using very clever geometry and hardware, these units can be used as a normal Roll Center Adjuster, Ackermann Adjust Roll Center Adjuster or Negative Camber Roll Center...