5429912711
Skip to main content
  • TRD Short Stroke Adjustable Shocks TRD Short Stroke Adjustable Shocks
    TRD Short Stroke Adjustable Shocks
    TRD Short Stroke Race Dampers (adjustable). These are the  blue model's which are for race handling use. Best for cars sitting 2" or more below factory height. For use with much  firmer than factory spring rates. Best for use with lowering...
    $330.00
  • Weld On Coilover Kit Weld On Coilover Kit
    Weld On Coilover Kit
    Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...
    $325.00
  • T3 CP107 Camber Plates T3 CP107 Camber Plates
    T3 CP107 Camber Plates
      T3 Black Camber Plates! The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into are actually a hair smaller than the bearing going into them...
    $325.00
  • Tall Lever Short Shift Kit Tall Lever Short Shift Kit
    Tall Lever Short Shift Kit
    This is our latest variation on our short shift kit. Over the years, we've had several requests for a "Tall Shifter". Our own Formula D AE86 used a long shifter to postion the shift lever higher and closer to the steering wheel for quick adjustments...
    $285.00
    Add to Cart The item has been added
  • Short Shift Kit Short Shift Kit
    Short Shift Kit
    Our T3 Short Throw Shifter features a 55% reduction in throw. Yes! That is 55% reduction vs. TRD's 33% Reduction in throw. COMPLETE BOLT IN UNIT. What you see pictured is what you get. Our kit includes: A complete set of 3 Delrin bushings for a...
    $285.00
    Add to Cart The item has been added
  • Rear Short Stroke Shocks Rear Short Stroke Shocks
    Rear Short Stroke Shocks
    We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...
    $230.00
  • ITG Filter System for 40mm Carbs
    ITG Filter System for 40mm Carbs
      We designed a backing plate that perfectly mounts up to the 40mm Mikuni, Webber and Solex carbs and allows the usage of the ITG Filtration system. Our velocity stacks fit perfectly inside as well! Quick Release system to easily remove the filters...
    $95.00
  • Velocity Stacks For Carburetors Velocity Stacks For Carburetors
    Velocity Stacks For Carburetors
      Techno Toy Tuning Velocitiy Stacks for the Weber, Mikuni, and Solex carburetors. Solid billet construction, these are machined from one piece of aluminum from beginning to end. Fully radiused mouth for maximum airflow potential. Availabe in 40mm,...
    $245.00
  • T3 x Swift Japan Springs Pair      T3 x Swift Japan Springs Pair
    T3 x Swift Japan Springs Pair
      Swift is a high end manufacturer of coil springs from Japan and provides top quality products. Swift's Springs are wound with less coil than competitors allowing for more stroke and reduced weight! Noticeable increase in traction, smoother...
    $180.00
  • Front Strut Tower Brace for RT142 Corona Front Strut Tower Brace for RT142 Corona
    Front Strut Tower Brace for RT142 Corona
    Light weight aluminum construction, powder coated laser cut steel brackets, and spherical rod end construction with right/left hand threading for an exact adjustable fit. We chose to powder coat the brackets because it is far more durable than paint...
    $175.00
    Add to Cart The item has been added
Your cart is empty