Supra

Our Front Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It includes a pair of longer sleeves, weld on perches, upper hats, and your choice of spring rate!  The kit was designed for the "do it yourselfer" that...

Our SUPER Evolved Knuckles (steering arms) for Toyotas with 85mm or 90mm Strut Casings. Based on years of testing and feedback from pro drifters and road racers like Taka Aono, we have refined our knuckles into this ultimate rendition! The SUPER...

Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-sway Bars improve the...

Fully Fabricated Steel Lower Control Arms (No used OEM parts)! Double Adjustable hardware (extend or shorten on car, no unbolting) All plated or stainless hardware. Oversized Teflon lined 3 piece rod ends on inboard side. Body is powder coated Metallic...

  Our Front Bolt-On Coilover Kit was designed as a "slip on" option for those using full length shocks and looking for the ability to adjust their ride height. It includes short sleeves, spring perches, upper hats, and your choice of spring rate!...

We've done a small run of the special edition black camber plates for the MA60 and MX73. The bearings on these are inserted into the aluminum blocks with what is called an "interference fit". What that means is that the holes that the bearings go into...

New Design! Lighter weight! Incredible strength! Billet Aluminum Rod with Stainless Steel Foot Three piece precision rod ends with 3/4" shank, and 5/8" bore, making them INCREDIBLY strong. The rod ends are also Teflon lined, making them self lubricating...

  Our RA64/MA60 Racing Seat Rails are now ready! These will accommodate very short to very tall drivers with no problems! Fully adjustable for height and tilt. Design allows you to fit the seat between the seat rails and down super low. All...

Our new MA60/MA61 Solid Rear Subframe Bushings are a great solution for tightening up the rear diff and suspension in your Supra! On top of that, we've reduced the overall height of the bushings to help correct some of the excessive camber and toe...

Cusco Type ALC-OS Front Strut Brace for the A70 Toyota Supra. (May also fit Z20 Soarer) The Cusco Type ALC OS starts out the same as the classic Type OS bar, but offers a different look. The tubular aluminum oval shaft is carried over from the Type OS,...

From light weight aluminum, mounts under engine to keep the engine bay clean, and improve airflow under the car.  Comes with all bracketry and mounting hardware. Cooling vents pressed in. This part will meet and exceed all your expectations for fit...

We now offer 3 different levels of Rear Short Stroke Shocks to fit your budget and specific driving needs! Now….what’s the difference in these 3 damper choices? I’m sure it can seem a bit confusing with so many options...