Mazda

Many of us remove the rear interior from our  RX7's This panel is a replacement for the plastic panel that covers the tail light area in the car. Made from .050 aluminum, very light weight, but...

We have curated a bolt kit featuring the most common sizes used on any Mazda! Replacing old corroded pieces with fresh ones not only dresses your car up nicely but makes future work a lot...

Many of us remove the rear interior from our  RX7's These panesl are a replacement for the panels behind the strut towers and leading up to the tail light panel. Made from .050 aluminum, very light...

Our Toe Plates are a quick way to adjust your cars alignment at the track! With the plates resting against your wheels, you can simply use 2 tape measures to adjust your cars toe in or out! We also...

The RX7's with Glass Sunroof's used plastic hardware that has deteriorated over time. It's easy to break and hard to find. We went ahead and reproduced the hardware from stainless steel so that it...

So...you built your coilover setup. Maybe you used HTS shocks or Koni Race dampers and cut your strut casings 40mm and find that the car is too low. Or you purchased a car that had some lowering...

If you are using our camber plates and need a little more height, these riser blocks are the ticket.  These gold blocks click into place between the camber plate bearing block and the camber plate,...

The RX-7 is an absolutely amazing car, but the steering system does leave something to be desired. The steering box can move around during hard cornering and leave you with a sloppy steering feel...

  T3 replacement Spart Tire Cover. The original spare tire cover on most classic Japanese cars is made from essentially thick cardboard and disintegrates into mush over time. Our spare tire cover is...